Ariat FR M4 Low Rise Workhorse Boot Cut Jean 10017262

Ariat FR M4 Low Rise Workhorse Boot Cut Jean 10017262

DESCRIPTION

STYLE # 10017262

Ariat Flame Resistant Denim offers protection in extreme environments, with a style that looks great everywhere.

• CAT 2
• ATPV 20
• NFPA 70E
• NFPA 2112
• Boot cut leg opening
• Hidden iPhone pocket
• Multi tool pocket

TECHNOLOGY:

NFPA 2112

The National Fire Protection Agency's (NFPA) 2112

• For oil & petrochemical industries, this standard mandates that employees wear flame-resistant clothing if the potential for flash fire exists.

NFPA 70E

The National Fire Protection Agency's (NFPA) 70E is a Standard for Electrical Safety Requirements for Employee Workplaces

• It requires employees to wear flame resistant protective clothing wherever there is possible exposure to an electric arc flash.
• For oil & petrochemical industries, this standard mandates that employees wear flame-resistant clothing if the potential for flash fire exists.

HRC 2

An HRC or Hazard Risk Category is a rating for FR clothing that indicates the level of protection the garment provides.

• HRC 0 represents the least amount of protection
• HRC 4 represents the most protection
• Most of Ariat's clothing falls within HRC 1 or 2 based on their APV ratings

ATPV 20

An Arc Thermal Performance Value (ATPV) is a rating assigned to flame-resistant clothing indicating the level of protection provided.

• Higher-weight fabrics typically have a higher ATPV and provide increased protection (as does the layering of FR clothing).

CARE INSTRUCTIONS:

• Warning: Failure to launder garment properly can result in loss of flame resistance properties.
• Flame resistant clothing should be laundered separately from the family wash to prevent cross contamination.
• Washing new garments before wearing is recommended.  Wash new garments separately from other garments.
• Turn garment inside out before washing for best results.
• Machine was using typical home launder detergent.
• Liquid detergents or other products containing hydrogen peroxide should not be used.
• Avoid starch, fabric softener or any other laundry additives such as soil release or anti-statics.
• Bleach must never be used on FR fabrics.
• Chlorine bleach (sodium hypochlorite) and oxygen bleach (hydrogen peroxide), either alone or in combination with other chemistry must never be used.
• Denim can be washed on the Cotton/Sturdy cycle with the wash temperature set to Hot.
• Woven shirts can be washed on the Cotton/Sturdy cycle with the wash temperature set to Warm.
• Knit shirts and Polartec apparel should be washed on the Gentle cycle with the wash temperature set to Cold.
• Tumble Dry.
• Dry denim and woven shirts on the Cottons setting, but do not over dry the garments to avoid shrinkage.
• Dry knit shirts and Polartec apparel on Low Heat, remove promptly.
• Iron as needed on appropriate fabric setting.
• Dry cleaning does not affect the FR properties of the fabric, but, in some cases, dry cleaning chemical residue left on the fabric could burn.
• Polartec apparel cannot be ironed nor dry cleaned.